![]() |
|
#27
|
|||
|
|||
|
Update:
its is developing a vert sync lock issue. the vert hold is critical, will drift as it warms up. I tried subbing the sync sep tube, no joy. The video signal is strong, horz lock no problem. The blanking bar looks good, the hammer is slightly jagged (the start and stop points are offset so it not a nice perfect rectangle, but its been like that for a long time, before the issue). I suspect its the vert integrater since the vert osc seems to have plenty of adjusment both way, just a very soft lock. I will get the scope out 1st and check the vert sync pulse to see how it looks before and after the integrater. The plan is to check the pulse before the integrater, then pull the vert out tube (brightness all the way down) and check the grid of the vert mult tube and see how it looks. I hope this is a push over since I really like watching this set and don't want a dog. |
| Thread Tools | |
| Display Modes | |
|
|