Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 03-02-2010, 08:02 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
A lot of these TV's that are being destroyed probably worked just fine or could have easily been fixed. It used to burn me up, back when used TVs were still a somewhat hot item, to see a nice set that I could have gotten good money for had some idiot not busted it to pieces.
Reply With Quote
  #2  
Old 03-02-2010, 08:13 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
Pretty funny that there's a packet of smokes in one of those gutted BPC sets...

Copper thieves strike again! They'll take anything made of copper, illegal or legal....kind of crazy how bad it's gotten...
Reply With Quote
  #3  
Old 03-02-2010, 08:18 PM
zenithfan1's Avatar
zenithfan1 zenithfan1 is offline
Mark
 
Join Date: Jan 2008
Location: Kenosha, Wisconsin
Posts: 4,211
Quote:
Originally Posted by zenith2134 View Post
packet of smokes.
Never heard one say it that way

We have them here too, I call 'em the "copper smashers" and boy do they make a mess. I can't wait until I catch one smashing a tv in front of my house.
They won't be happy.. I just missed one a while back and he was lucky I wasn't around with a bat. My house sits very close to the road so I get more pissed than most about this kind of stuff. That and I'm sick of all the kenosha losers.
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26
Reply With Quote
  #4  
Old 03-02-2010, 08:31 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by zenithfan1 View Post
Never heard one say it that way

We have them here too, I call 'em the "copper smashers" and boy do they make a mess. I can't wait until I catch one smashing a tv in front of my house.
They won't be happy.. I just missed one a while back and he was lucky I wasn't around with a bat. My house sits very close to the road so I get more pissed than most about this kind of stuff. That and I'm sick of all the kenosha losers.
I'd tell you to move to Mississippi; but, we probably have just as many losers down here.

About 2 weeks ago, I stuck a dud 2003 HP computer monitor out on the curb. Some guy pulled up in a clunker Cadillac and picked it up. He wouldn't have wanted to face the wrath of my Mother had she looked out and caught him smashing it. We have enough problems with garbage blowing in our yard from all the idiots in the neighborhood who don't have sense enough to tie up a trash bag.

There is one guy that I call when I have a load of crap and he comes and haules it off and acts like he's glad to get the crap. I told him the kind of stuff I was looking for and he said he'd save any that he found. So far, nothing has surfaced.
Reply With Quote
  #5  
Old 03-02-2010, 08:23 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Although the copper prices have gone down, several enterprising folks here in Norfolk make quite a bit from TV and copper scrapping - we're talking about 400-600 dollars a week! One gent I met at the metals place gets every bit of copper out of a TV - chassis, yoke and degaussing coil. We discussed the "best" sets to scrap - he agreed that Sony puts the most copper in sets. He also likes the projection jobs - easy to gut on the curb.

He hooked me up with an Admiral black and white 15" tube portable - not much in the way of copper, or tubes - it was missing all but the RF amp tube in the tuner.

What we see as a missed opportunity, he sees as income.

Me, I sell copper from BPC sets and the occasional extension cord I find when trash pickin' - but most of my metals are aluminum chassis parts from gutted test and computer equipment and aluminum cans from my Diet Coke addiction.

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:02 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.