Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-27-2010, 09:26 PM
leadlike's Avatar
leadlike leadlike is offline
VideoKarma Member
 
Join Date: Apr 2008
Location: Lancaster, Pa
Posts: 956
On the matter of testing the filament string, you could just put in one tube at a time, as this set is wired in parallel. Some cheaper sets were wired in series, which meant that just like a cheap set of christmas lights, when one bulb, or in this case, tube, goes, then the whole set would die. But in this set that is not such an issue. Also, I would like to emphasize, if you are going to try this, you must not only pull the rectifier tube, but clip all of the wires coming from the transformer leading to the 5z4 socket. Even if the tube is pulled, the socket will continue to arc, as it is faulty.

Looking at the 5z4 vs. 5y3: They pin out the same, but the 5z4 has a cathode, while the 5y3 does not. I'm not sure if this would cause a problem or not, but if I was in your position I would get a proper 5z4.

Here are the pinouts;
5z4 The cathode is attached to pin 8, along with the filament string:

http://www.nostalgiaair.org/tubes/5z4.htm

5y3 Note that the filaments do the work that the cathode was doing in the 5z4:

http://www.nostalgiaair.org/tubes/5y3.htm
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:31 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.