Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-26-2010, 01:20 AM
de.facto7's Avatar
de.facto7 de.facto7 is offline
AK Subscriber
 
Join Date: Feb 2010
Location: utah
Posts: 112
Guys.. Thanks for the help. I learned how to track down a circuit without a PC board. I was able to use the detail as well as the bits and pieces of info about tubes and the pin setup and I found 2 wiring mistakes, my mistakes of course, that put my PMV (dim bulb tester) to sleep!

The 60W dropped right back but it didn't start out very high as I am used to for getting those caps jump started. Then after about 2 seconds, I started to hear something very faint and my gut reaction was to flip the switch on the PMV which I did. It wasn't like a crackle or a fizz but more like a faint hiss. Anyway, there was no smell or smoke or heat that I could tell. I still have no tubs in, but that pin 2 and 7 on the 6F6 are still showing ground to chassis. After figuring out which pin is which... 3, 4, 6 and 8 are not grounded... 1, 2, 5 and 7 are. 6 isn't used.

Should I turn the thing back on? I'll wait for now.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.