Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #19  
Old 02-22-2010, 01:09 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
"What's in those attenutators, exactly, besides a potentiometer? "

Mine is soldered shut all around the box, so I have not looked inside... but here is how it acts:

At "min", input to gnd =200 ohms, input to output= 2 ohms, output to ground=200 ohms.

"centered", input to gnd =180 ohms, input to output= 220 ohms, output to ground=380 ohms.

At "max", input to gnd =48ohms, input to output= 510 ohms, output to ground=560ohms.

Any guesses as to whats inside? perhaps 2 pots and a couple of resistors?

A nice switched rf attenuator can be constructed using this guide:

http://www.merseyworld.com/wadarc/Te...Attenuator.htm

The values given are for a 50 ohm environment... for 75 ohm, recalculate the resistor values... 3db r1&r2=440 ohm r3=27 ohm; 6db r1&r2=220 ohm r3=56ohm; 10db r1&r2=140 ohm r3=106ohm; 20db r1&r2=91ohm r3=370ohm.

jr

Last edited by jr_tech; 02-22-2010 at 03:49 PM. Reason: add info
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:06 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.