Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2010, 05:42 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 4,573
Quote:
Originally Posted by cwmoser View Post
I've understand that the ION Magnet should be adjusted to the brightest image. I backed mine off slightly from maximum brightness to eliminate shadows on the edge of the picture tube. I assume this is OK considering that the ions still will not hit the phosphorous because the electron gun shoots out deflected?

Then I have heard that if you don't adjust the ION magnet just right, it will mark the center of the picture tube.

Comments?
Possibly you could re-position the yoke slightly to obtain reduce the "neck shadow" and then obtain a brighter picture by re-adjusting the ion trap to its optimum position, but I don't think that a slight mis-adjustment of the trap magnet will allow ions to strike the screen. A VERY MUCH stronger magnet would be required to bend the ion beam enough to travel straight down the gun.
BTW The screen is coated with "phosphor*" not the element phosphorous, many confuse the two terms.

*For example, "white" P4 Phosphor is actually a mix of "blue" Zinc Sulfide (silver and zinc doped) and "Yellow" Cadmium Sulfide (silver doped).

jr

Last edited by jr_tech; 02-11-2010 at 05:54 PM. Reason: add P4 info
Reply With Quote
  #2  
Old 02-11-2010, 10:32 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
Quote:
Originally Posted by jr_tech View Post
Possibly you could re-position the yoke slightly to obtain reduce the "neck shadow" and then obtain a brighter picture by re-adjusting the ion trap to its optimum position, but I don't think that a slight mis-adjustment of the trap magnet will allow ions to strike the screen. A VERY MUCH stronger magnet would be required to bend the ion beam enough to travel straight down the gun.
BTW The screen is coated with "phosphor*" not the element phosphorous, many confuse the two terms.

*For example, "white" P4 Phosphor is actually a mix of "blue" Zinc Sulfide (silver and zinc doped) and "Yellow" Cadmium Sulfide (silver doped).

jr
Thanks. I keep having people with degrees as high as PhD's ask me to coat viewers with Red Phosphorus when they mean Red Phosphor. They think I'm strange for expecting them to know that much chemistry. I'm the one who should be confused, chemistry was my worst subject.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:54 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.