Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 02-02-2010, 05:49 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
did some more viewing, had dragnet on (badge with red background) purity has issues, I need to get a proper degauser ring, but will also check the built in deqausing coil to make sure it is getting activated.

Convergence and pin cusion look good on OTA broadcasting but I will put the dot bar generator on it anyway later.

Still need to tweak the color setup the white is a little blue, but other than that it looks great. Nice bright picture with plenty of sharpness.

Stereo has issues, one channel does not repond to the volume but does to the balance, and tone is wrong as well on that one. I will need to pull the stereo chassis out and go over it.

Its going to be easy to hook up the stereo to the aux and just keep the vc on the tv turned down (thats what I was doing when I noticed the stereo amp issues).

Of course I need to fix the filter caps and button down those boards, but this looks like its going to be a push over (well until that stereo VC issued popped up anyway). My guess is an open VC ground on one channel, hope its a pcb issue and not the VC itself.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:45 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.