Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 02-01-2010, 07:23 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
Quote:
Originally Posted by DaveWM View Post

Oh and the IF board did not have ANY chassis screws so I stole one from another board and used a single screw to ground that board. Dont know if that had anything to do with the pic improvement.
Years back I was fixing up an Akai receiver, and found that missing/loose board mounting screws allowed microprocessor crud into the audio. Was a low level high frequency buzz. I ended up using screws with split ring washer/spring things to apply pressure on the board ground trace-chassis connection, even if the screw is slightly loose. Seems to work well years later.

If the extra filter cap cleaned up the hum, and it wasn't the chassis screw, I'd replace the original cap that is supposed to do that filtering. Before it shorts out.
__________________
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:37 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.