Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 01-19-2010, 01:45 AM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
I tried the used 12LP4 from the Sonora again, mostly to take a photo and try having the bridge in the correct horizontal position. That's the photo on the left. Ignore the vertical non-linearity, my bad.

The bridge position didn't help the focus. It did turn out to be related to the depth of field of the focus of the beam, but not because of a rotation of the screen around the focal plane.

You'll notice a bluish stain in the bottom right corner. This is opposite the HV connector. The HV connector is on top in the Sonora so this stained region is outside of the normal scan in that set. In the Sylvania I have to have the connector at a 45deg angle so that's why it shows up here. Its a really odd stain/ion burn because when you look at it closely you can see that the phosphor grains are coated on one side. I have no idea how this occurred.

The RCA data sheet for the 12LP4 gives more information than the others. It gives focus and ion trap strengths for 9KV and 11KV. The proper field strength for the ion trap at 9KV is about 14% less than it is at 11KV. That means it should be 30 Gauss instead of 35 Gauss. That's probably why I can't adjust the double field ion trap properly because I'm at 8.8KV. If I try this CRT again I'll make a shunt for the trap to reduce its field. I should be able to do at least 9.5KV with the Sylvania. That's supposed to be less than the peak value obtainable. Perhaps I missed something when I worked on the HV section. Maybe the RF transformer is getting lossy. The Sylvania manual also says to try different 6Y6 tubes since they're not all created equal. Or, maybe it thinks it's a Philco.

Since the focus field should be smaller at 9KV and it should be smaller also for a tetrode CRT than a triode CRT I decided to try to reduce the focus field more than I was able to easily do before. I was afraid that I would have to add more shunts, but there was still some adjustment room left.

Now the focus isn't perfect, but it's fairly uniform across the screen. There is some astigmatism. The focus magnet is close to the yoke at the moment. I will move it farther back which should help and eliminate the shadowing on the left.

The Sylvania is capable of better resolution than you see here, though it's not bad for a set of this vintage. It's mainly a focus problem. If I can get the HV up to 11KV I think things will look much better.

They did a really good job of rebuilding the two CRTs I have. They have excellent emission and are nearly identical in performance. My only concern is that they no longer use an ion trap.

John
Attached Images
File Type: jpg sonora_crt.jpg (103.7 KB, 29 views)
File Type: jpg rebuilt_crt.jpg (115.5 KB, 32 views)
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:45 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.