![]() |
|
#4
|
||||
|
||||
|
Quote:
I also discovered several dubious repairs like these two 0.001 MFD caps in the sync inv. / disc. circuit. I have no idea what type of cap is correct or what the voltage rating should be. I just went with what I had on hand - 630 V poly caps. Does anyone have a parts list for a 20A1 chassis that does specify these caps? ![]() Also the original 8.2K power resistor in the HV cage is open and was bypassed at some point with the smaller green one. That's a shame because I really like that old style ceramic resistor. I'll try to dig up one that looks better and mount it properly. ![]() There's an interesting metal hoop under the HV rectifier tube. I wonder what that's for? ![]() Here's the first picture I got using rabbit ears and local lower power channel 6 using a 5AXP4 test CRT. ![]() And here it is using the 10BP4 The CRT is brighter than I was expected based on the weak test reading. I guess time will tell.![]() ![]() ![]() It's nice to have an easy restoration for a change
Last edited by bandersen; 01-12-2010 at 12:42 AM. |
| Thread Tools | |
| Display Modes | |
|
|