![]() |
|
|
|
#1
|
|||
|
|||
|
Ion trap, perhaps not required on new CRT, used to prevent brown ion burns on non aluminized CRT's
|
|
#2
|
||||
|
||||
|
You can experiment by sliding it forward and back on the CRT neck, and rotating it one way or the other. Eventually, you should find a "sweet spot" where it makes the picture brighter than any other position.
Phil |
|
#3
|
||||
|
||||
|
If I Recall Correctly (IIRC), you wouldn't even see a picture on the new CRT if it required an ion trap and you didn't have it on. The electron gun aims the electrons and ions downwards so they'd hit the inside of the CRT's neck. And as electrons are way less massive than ions, it's easy for a magnet to deflect the electrons and barely touch the ions. I don't know if they placed getter material at that spot of the neck's glass to trap the ions, to take them out of circulation.
__________________
|
|
#4
|
||||
|
||||
|
The 21XP4A is aluminized while the 21XP4 isn't.
The Tungsol data sheet says that they both use an external single field Ion Trap. The GE data sheet says that the 21XP4A uses an ion trap. The fact that the screen went white and had a raster makes me think that you were just saturating the screen. I'd try the trap again and turn the brightness down, if you haven't tried that. John |
![]() |
| Thread Tools | |
| Display Modes | |
|
|