Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #18  
Old 01-04-2010, 09:52 PM
rollei35guy rollei35guy is offline
...
 
Join Date: May 2008
Posts: 86
Quote:
Originally Posted by Adam View Post
I finally looked at this 1957 RCA clock radio I got when I started this thread. I had assumed the clock was like the others I had seen, where the mechanism is sealed, but that wasn't totally the case here, couldn't get it totally apart, but got a cover off and got in there enough to squirt some WD40 in there, which so far has quieted it down.

The radio portion had a corner broken off the circuit board, but I glued it back together with super glue, waited until I was sure it was dry, then just added solder across the one trace that went across the corner, I was going to add a wire in it's place, but it soldered up good, so I left it like that. Other than new caps, the radio just needed a new 50C5 to replace the one in there with an open filament. Now I finally have a good old, quiet clock radio.
Does that disk on the back of the radio spin out in the open? I've seen a couple of clocks like that but not, so far, in a radio.

That's a nice looking radio you have there. Very clean.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.