Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 12-12-2009, 11:40 AM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
At first there was no sound and buzzing, but after realigning the sound IF and detector transformer, the sound comes in good.

The sound IF was so far out of alignment (it was turned all the way one way) that I think someone got in there and messed with it, not knowing what they were doing. I think they probably did the same with every other adjustment, this is why I'm so certain my problem is alignment. Remember this was the set in which someone had also installed the wrong yoke and fly from another set.

I put some pics over on the arf a while ago, both with the 8XP4 test crt, and the set's own 16GP4. Retrace lines are a problem, but otherwise the picture's fine as long as there's no sound in the signal it's receiving. Completely 100% recapped all paper caps and electrolytics. I understand there's some micas in the horiz oscillator which also tend to go bad, but horiz sync is good, so they must be ok for now.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:07 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.