Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 12-07-2009, 03:49 PM
miniman82's Avatar
miniman82 miniman82 is offline
First Light: 1952-2011
 
Join Date: Jun 2009
Location: Great Mills, MD
Posts: 4,183
One thing that helps is having dead nuts accurate values for caps and resistors in those particular circuits. I've found that the horizontal section is especially picky about what you put in it, even a small change from what's called for in the schematic will leave the set completely dead. And even if the circuit does work correctly, you have to be especially mindful of the horizontal output tube. When I was getting my Halolight up and running, I never thought to check the 6BQ6GT tube because it was working perfectly and drawing the correct cathode current. Big mistake to assume it was OK! I happened to look over at it while doing some work on the chassis with the lights dim, and the plate was glowing bright red! Only thing that fixed that was a new tube, which doesn't glow at all. Strange though, that same tube in my Philco works just fine...

Ah well, I don't pretend to want to understand these things. It's enough that I enjoy watching them while they are around.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:50 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.