Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 11-30-2009, 07:39 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
looking better all the time, replaced the horz afc diodes, had to re adjust the horz osc coil, checked the HOT cathode current right on the money (124 ma). I will be adding a cathode fuse later and maybe a B+ fuse as well. pic has a bit of a lnterlace problem, but seems to be settling down. You can work it out pretty well with very careful adj of the vert hold but it is just a little to critical. It seems to be getting better as the tv is used. I dont know what circuit in the set conrols vertical interlace sync phase inverter perhaps?

I will check that tube its a 6gh8 by subing with a working one. other tubes include the sync sep /video output tube a 6eb8.

and of course I can check the various resistor in and around those same tubes.

If someone can explain how the interlace is controled pls jump in.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.