![]() |
|
|
|
#1
|
|||
|
|||
|
I would be interested in the voltages on pin 6, 7 and 8. If c140 was leaky that could do it for sure. Or if r198 had gone way up in value that would do it too. With the tube plugged in I would 'feel' r198 to see if its super hot like the tube is biased on and loading the resistor down. If r196 were open I suspect it could cause the tube to bias on load that voltage down too.
For some reason someone circled that resistor on my copy of the sams..... |
![]() |
| Thread Tools | |
| Display Modes | |
|
|