Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #25  
Old 11-13-2009, 10:40 PM
Mick AV-8 Mick AV-8 is offline
AK Member
 
Join Date: Sep 2009
Posts: 87
Bought a Philips modulator and hooked it up and I obtained a pretty decent picture
Just a little..ghosting some times in the left of the screen..but it is not always there.
Now the volume control knob is very crunchy and crackles when turned..sometimes creating enough static to make the picture go out..and I( give the horiz. size control switch a turn back and forth and the picture retuns. I turned the volume control to full and because the sync between good picture and good sound is not dead on..the turner makes the sound quiet and I can listen to show. But as time passes like 15 minutes or so the sound is totally lost.
Shut it off for about 20 minutes and I can get it back again.

So I am really pumped for I can now get a pretty nice picture..really good with no chance of volume. Turn the picture control knob and just barely find a volume signal.
Do you think it could be a particular weak tube that would do this? Which ones should I have tested?

Here are a few shots of the tv with the halolight on lowest setting.
Not sure if I actually like watching the tv with it on..but it is cool!
Attached Images
File Type: jpg philips-modulator.jpg (23.4 KB, 28 views)
File Type: jpg philips-modulator2.jpg (15.2 KB, 29 views)
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:30 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.