|
|
|
|
|
#1
11-11-2009, 04:00 PM
|
|||
|
|||
|
Any test jig would work but the problem is that all the wires to the yoke and convergence yoke are hardwired in, they do not plug in. I do not want to try to unsolder everything especially on the convergence panel which is very hart to get to in the first place.
Steve 
|
|
#2
11-11-2009, 10:05 PM
|
||||
|
||||
|
that could be a real pain, to unsolder all the yoke and convergence wires.... some nice set though!
About the portacolor noises....i just switched mine on and couldn't hear this. Strange. My favorite is the crackle of the yoke absorbing all the static from the neck when a crt is switched off.....oh and BTW, "This Tube Employs INTEGRAL Implosion Protection....Do Not Adjust Your Set!" 
|
|
#3
11-13-2009, 10:40 PM
|
|||
|
|||
|
Well I think that I am going to call it a day with this set. I have an OK picture. Still some purity issues but the convergence is good. I put it back together and took the following pictures. Some of the pictures have curvy lines that are from the camera and not on the screen.
The sad thing now is that I have to return it to its owner. Steve
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
