![]() |
|
|
|
#1
|
|||
|
|||
|
here they are...
|
|
#2
|
|||
|
|||
|
opps here there are again
Last edited by DaveWM; 03-18-2013 at 12:04 PM. |
|
#3
|
|||
|
|||
|
couple more for now
Last edited by DaveWM; 03-18-2013 at 12:04 PM. |
|
#4
|
|||
|
|||
|
wow you got another one! I seem to attract zenith combos. There was one of these locally but the gal wanted $150 for it in not working condition. I just couldnt pay that much for a bw.
How do the crts seem to hold up in these? All the 21 inch bw sets I have found have almost dead crts. They dont seem to last like the smaller ones. I have all my combos setup like that. I usually just put a bypass on the tv power switch so i can leave the tv in the off mode which connects the amp to the speakers. Most of the combos sound really good with a clean input. Hows the flyback meltage in this one? |
|
#5
|
|||
|
|||
|
fly looks very good, so far CRT's have been ok to weak, but all work.
power tranny looks/smells ok. Both EL84's are shot, as is to be expected. I did not remember seeing a rectifier tube, so I am guessing a doubler circuit. those IIRC have the under the chassis caps which dont seem to hold up as well as the twist locks. There is some water damage to the particle board bottom left front, I will knock it down and stablize with some epoxy wood filler. I would just cut it out, but its what the wiring diagram is glued to, and I would like to save that. The size is very nice, should fit into a small room very well. I think I could set up a small flat screen color (boo,hiss) on top for watching color shows, and use the B&W for vintage programing, both using the stereo amp of course. I will pull the HOT and do a current monitored slow power up just to see what happens. there are a couple suspect caps in the HV circuit that are 50/50 (white tube shaped) I prob should pull the chassis and check for bumble bees or black beauties, as this may be a 60,61 which may have used those instead of the white tubes like the others. This was a 20$ deal so I had to go for it. With the DVD/converter you get the full remote experience which is very nice, Just need to get a clapper to turn it on and of and I will be good to to. I considered the use of the aux, but it was a real easy fix on the last one to just add in another RCA input, clip the wires on the waffer switch, and run the new RCA to the remaing channel, now clipped off. That keeps the TV power on switch working AND saves the aux for a CD player. |
| Audiokarma |
|
#6
|
|||
|
|||
|
I have never been a fan of having the woofers setup like that. To much cancellation. I have an rca like that and an one where they both fire front, everything else is the same and the front firing had 5x the bass.
I cant get into any of the old shows. To me its like watching a foreign language movie and dont understand a thing. I sometimes watch the news on my bw if I stand the propaganda at the time. I have noticed that the filter caps will act shorted and get hot then if you let them cool down they are fine. Its like something breaks loose and they un short. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|