Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 11-06-2009, 08:33 AM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
Quote:
Originally Posted by Mick AV-8 View Post
Here are some pics..not sure its a 1953 Sylvania Halolight chassis 23 M-1
Andover model chassis 87111-084-075, 20CP4A tube.
does the tube need to be removed to get at the HV cage?
Your photo matches the chassis layout shown in the service info for that model. Unfortunately they don't give instructions on opening the cage and you'll have to figure it out. The wing nuts are for adjusting the yoke position.

Wear safety goggles, gloves, and heavy clothes when and if you remove the CRT. The heavy clothes are overkill. You're unlikely to break the CRT, but why take a chance.

If you replace the caps, pay attention to the lead dress. It can be important here to prevent arcing. The same for the 5642 tubes.

John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:38 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.