Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 10-23-2009, 10:59 PM
ohohyodafarted's Avatar
ohohyodafarted ohohyodafarted is offline
Bob Galanter
 
Join Date: Sep 2005
Location: Whitefish Bay, Wi (Milwaukee)
Posts: 1,080
I wish there had been an easier road to get where we are now Charlie.

Out biggest obsticle has been that we are now at the end of the crt era. There is almost no one left in the CRT industry. We have one company that can rebuild the guns, and they are getting near the end of doing business. There is one company that can make stems for us in the US. And we are down to one crt rebuilder, Scotty.

Scotty has worked with us every step of the way, and I can't tell you how dedicated he is to winning the fight to be able to restore these crt's. Without Scotty, we would be SOL. We are also fortunate that Scotty is not to far from Milwaukee, and I can drive there in only 8 hours. When we get to the stage where we are actually attempting to seal and rebuild the leakers, it will be necessary to work hand in hand with Scotty at his plant. We will be performing the sealing protocall experiments and Scotty will be doing the usual crt rebuilding things.

I know that it has been an agonizingly slow road getting to where we are today. But most of the difficult work is done now. We have special tooling and equipment to remove the old cathode assemblies. We have a company to make stems that work. We have a gun rebuilder to install new cathodes and mount the guns on the stems. We have Scotty on board to do the rebuilding and we have even machined some special parts for Scotties equipment to accomodate the unique parts of the 15GP22. We have special equipment built for our experiments in sealing the leakers, and we have developed special techniques for preping the tube for the sealing process.

It seems like it should have been a lot easier than it actually was, but you have to understand we are not working with a tube that anyone has ever tooled up to rebuild. So everything had to be custom made. Every step in the process had to be painstakenly researched and developed.

It has however been a labor of love, on a quest to do something of spectaular importance for all tv collectors interested in this very historic color tv artifact.

Please...everyone think good thoughts and say your prayers, and perhaps we will finally be rewarded with success.
__________________
Vacuum tubes are used in Wisconsin to help heat your house.

New Web Site under developement
ME http://AntiqueTvGuy.com
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:15 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.