![]() |
|
|
|
#1
|
|||
|
|||
|
Quote:
I really like the cabinet and it has a swivel base. This set had a shorted vert cent pot and it damaged the power supply. I was lucky that it did not take out the power transformer but had to replace all the can caps, B + Diodes, Power switch and the circuit breaker. The person I bought the set from HAD to plug it in and turn it on. ![]() Ed |
|
#2
|
|||
|
|||
|
nice cabinet, I am going to have to make a cabinet for my the old one is still wrapped up, termites are contained (i hope) but the damage is severe.
right now I am leaning toward a simple ply box with veneers and maybe some nice thin med long legs (the kind that screw on, nice if I can find some with a brass lower half). I sure would like to reproduce something nice like yours but my wood working is limited. what do you think about the color code problem on that one section? ever run into something like that? Last edited by DaveWM; 10-23-2009 at 07:33 AM. |
|
#3
|
||||
|
||||
|
TMA96 info
Here's what my manual has for the TMA96 - hope it helps with the tuner woes.
Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
|
#4
|
||||
|
||||
|
I'll try this again.
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! Last edited by Findm-Keepm; 01-03-2017 at 09:20 AM. |
|
#5
|
|||
|
|||
|
got it thx, it sitting on the variac all tubes out for a slow reform.
|
| Audiokarma |
|
#6
|
||||
|
||||
|
Wow, Ed! That's a nice looking 16!
I had one similar a few years back, but the top of the cabinet was in pretty bad shape due to getting wet for a very long time. It was a remote set. I gave it to Rich since he was tinkering with rebuilding cabinets back then.
__________________
Charlie Trahan He who dies with the most toys still dies. |
|
#7
|
|||
|
|||
|
seems the caps are fine, full voltage quickly, no heat, so I plugged in all the tubes and will hook up the crt/yoke/convergence bd tonight for a full power up. I will monitor the B+ current still.
will do this all later today, will post the results later. wish me luck... |
|
#8
|
|||
|
|||
|
Quote:
![]() Ed |
![]() |
| Thread Tools | |
| Display Modes | |
|
|