Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 10-21-2009, 07:08 PM
kvflyer kvflyer is offline
VideoKarma Member
 
Join Date: Nov 2006
Location: Fernandina Beach, FL
Posts: 1,132
Absolutely use new capacitors. The yellow ones are just fine. And tubes that look bad can be as good as new. Tubes that look just like the day they came out of the box can be totally shot.

Important that you replace electrolytic capacitors, the silver ones in a can. You can always put new ones below the chassis so that the TV looks "original". Just make sure you disconnect the leads from the old capacitor and connect them to the new capacitor.

A digital camera is your friend. Take tons of pictures of the overall location of parts, many, many close up photos also. That way, you can always know what things looked like before you started. Good luck!
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.