finally got me a roundie

[DaveWM]

disconnect both of the green lead for the one side (not the convergence socket side) now the B+ load is about 8k with cold filaments (resistance reading at the output of the bridge rectifier). Was 24 ohms (yikes) with the transformer in circuit.

Gonna need some help locating a replacement, figured I would ask here, and give moyers a call. I need a part number.

Its a CTC16XL, not sure what it is but its the xforer behind the HV cage. has

grn/yellow (disconnect to find short to ground)
grn (disconnect to find short to ground)
blue
red
yellow

then on the other side

Orange
blk/wht
red/blk
red/wht
red/green
green (this is connected to the chassis, I suspect it is a internal primary to secondary short causing the problem)