Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #33  
Old 10-03-2009, 09:14 PM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,383
So the problem is the wire wrapped around the flyback to feed filament voltage to the HV rectifier is arcing to the chassis right where it wraps around the flyback. What kind of wire do I need to replace this?

Also I checked some tubes while I had it apart, and noticed the focus rectifier is weak, then I noticed that it's a 2AV2, and there's supposed to be a 1V2 in there. I don't know what affect this had, but the picture would shrink on the left side if I turned the brightness way up, I wonder if this was the cause. I figure I'll put a new 1V2 in there, and also check the cathode current in the HO tube and the HV (which I never did on this set) before I put it back together. And maybe also touch up the convergence.

Last edited by Adam; 10-03-2009 at 09:18 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:36 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.