Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 09-26-2009, 12:35 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I've thought about this myself. I think the first thing to do would be to find a switched low voltage source inside the box. Then, find a schematic for any '80's/'90's remote TV and look at it's relay driver circuit and build something from that. There shouldn't be that many parts involved. Usually a relay, the driver transistor, and a shunt diode across the relay coil. If there's not enough room on the rear of the box to mount an AC receptical, you could run and securely mount a pigtail from an extension cord and have it running out of the rear of the box. This would be a good idea in order to make our older TV's fully remote controllable.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:02 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.