Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 09-25-2009, 10:02 PM
damen's Avatar
damen damen is offline
VideoKarma Member
 
Join Date: Feb 2008
Location: Portland, OR
Posts: 673
Thanks for your help on this guys. Here is a scan of the sams my scanner is to small to do a full shot. The more I have looked at it I to think it just don't show the exact same set up as mine the picture is so poor and faded it is hard to tell and the schematic seem to show one side of that diode going to ground and the other to a VDR and that is not the case on my chassis. Whats bad is when I got the set I replaced the resistor with a 100 ohm resistor and can't find the one I pulled it looked like that was what it was but being burnt I could have been wrong. The set does work well and has a good picture but the flyback seems to be running a little hot quite a bit hotter than my CTC 7 set so I just want to be sure that is the rite resistor. That resistor has a wire on the diode side that goes to the pin 9 of the shunt regulator and the other side is going to a 8.2 m ohm resistor to pin2 of the HOT and yes the 220k resistor on the white band side of the diode is going to the color killer.
Attached Images
File Type: jpg scan0007.jpg (100.1 KB, 24 views)
File Type: jpg scan0008.jpg (137.4 KB, 9 views)
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.