![]() |
|
|
|
#1
|
||||
|
||||
|
Well, before tearing it down, make sure no one was fiddling with the settings, ie, refresh rate, etc.
Most LCD screens consist of only 3 circuit boards: 1. Power supply board 2. Backlight board 3. Logic board So you're trouble is likely coming from the logic board. So that's where I would start. Since you have several of these around, you do have the luxury of swapping modules from a known good set into this one to track the issue down. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|