![]() |
|
|
|
#1
|
||||
|
||||
|
Quote:
Doesn't appear that any of the tubes are disconnected or missing. Nothing looks to be burnt just very dusty, will examine closer. I am not thinking that, I was thinking I wouldn't get a picture because of the strange repair/add on. So I didn't even attempted to plug it in. Once the stuff is put back to original I will try to power it up. Quote:
__________________
Jason- |
|
#2
|
||||
|
||||
|
I'm restoring a very similar looking chassis (20X1) right now too. It's also missing those metal plates.
I'd say my chassis was in worse condition than yours. So, if I can get mine going I'm sure you can too You can follow my progress in the 20X122 restoration thread. Maybe we can compare notes. Do you need the Sams? Good luck Bob |
|
#3
|
||||
|
||||
|
Quote:
__________________
Jason- Last edited by cooljjay; 07-24-2009 at 09:26 PM. |
|
#4
|
||||
|
||||
|
At least the butchery on your set is plain to see. On my Hallicrafters 505, a previous owner had neatly cannibalized the sound takeoff coil and two peaking coils. I had been happily recapping for a while, but mysteriously had no audio or video output. After poking around, I finally had a "what's missing from this picture" moment. Duh!
Phil |
![]() |
| Thread Tools | |
| Display Modes | |
|
|