![]() |
|
|
|
#1
|
|||
|
|||
|
TNX! That was about 6 months of working on that set a little at a time. It was working great for a year or so then it developed a vertical sycn problem that turn out to be a .01 mica in the output of the seperater. For some reason it only liked a mica cap there. That was another headscrater that took me awhite to figure out. I think I got the paint at Lowe's of Home Depot. I didn't have much of a choice not to paint as it was really rusty.
Terry |
|
#2
|
||||
|
||||
|
Quote:
Maybe you can help me avoid the same issue. Do you recall which cap that was - C315, C402 or C??? in this schematic? Thanks! Bob Last edited by bandersen; 10-02-2013 at 03:29 PM. |
|
#3
|
|||
|
|||
|
The early 20A1 is a little different. It uses a 6AU6 Sync Sep .The later version of the 20A1 is like yours. It was the .01 on the plate of the 6AU6.
Terry |
![]() |
| Thread Tools | |
| Display Modes | |
|
|