|
|
|
#20
07-10-2009, 09:14 PM
|
||||
|
||||
The jumper is original to the set. It's a disconnect in case yoke is accidentally un-plugged.
That cuts all b+ to set. iF HIS AC line was open, nothing would work. His tubes are lighting, and, he has B+. The problem is more like the set, or, at least part of it, isn't drawing any current. I still say resistors are likely at fault. Bill C
__________________
"Tubes are those little glass things that light up orange unless there is a short.. Then they light up all pretty colors..." Please join my forum. http://www.tuberadioforum.com/ 
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode