![]() |
|
|
|
#1
|
||||
|
||||
|
Part II - Finding one 2nd attempt
A few months later, I found another one in Omaha, Nebraska on eBay. I contacted the seller to discuss shipping. It turned out that he was handy with tools and agreed to dismantle the set and pack it properly in separate boxes.
Here they are at my place. Did they survive the journey? ![]() Yes, they sure did Not a single crack in the bakelite.![]() The chassis is fine and the CRT checks good. ![]() It has a nifty internal antenna too. It works sorta like like a giant DPDT switch. ![]() The CRT foam has disintegrated. No surprise there. ![]() The bakelite is incredibly dull and the faceplate has yellowed. Maybe a heavy smoker owned it? ![]() This is the color and shine I hope to restore. ![]() Next up - Step III - Cleaning... |
|
#2
|
||||
|
||||
|
Congrats of finally getting one intact!
I found one locally otherwise I never would have had the nerves to ship one. I used some Minwax Wood Stain to bring back the color on mine, when the Bakelite is dull it's pretty receptive to absorbing stain. I intended to clear coat it later but never got around to it so it needs to be freshened up a little. |
|
#3
|
||||
|
||||
|
Yeah, something tells me that polishing alone might not bring back the dark color. Perhaps this TV sat in bright light for years . . . ?
The shiny surface layer on some Bakelite is thin. If you get too aggressive, you'll polish it right off, and then get into a pulpy underlayer that can't be polished at all. If you polish an area and it gets (or stays) shiny but doesn't change color, then you may want to try something else. Phil Nelson |
![]() |
| Thread Tools | |
| Display Modes | |
|
|