Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #17  
Old 06-19-2009, 12:04 PM
Phil Nelson's Avatar
Phil Nelson Phil Nelson is offline
VideoKarma Member
 
Join Date: Jan 2006
Posts: 4,030
Any tips on where to find a replacement for the vertical centering pot? 10 ohms, 2 watts (WW) according to the schematic. It's a little flat one, adjustable with a screwdriver through a chassis hole.

I will try to clean it when I get back under the chassis, but just in case . . .

The little selenium rectifier on the convergence board is also iffy. One of the plates is loose and it jiggles the picture slightly when you push on it. M7 on the schematic, one package with three diodes. The current plan is to replace with three fast 1N4007 diodes unless there's a better solution.

Phil
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:05 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.