Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 06-06-2009, 10:13 AM
Reece's Avatar
Reece Reece is offline
VideoKarma Member
 
Join Date: Jul 2004
Location: Cleona, PA
Posts: 2,178
We don't know yet what the problem is before blaming the IF transformers. There are a number of things that could be wrong with it.

First: did the radio work at all before you recapped it?

I could not find a 344 schematic, found a 343 on Nostalgia Air, but am guessing this is a 5 tube AC/DC radio? It should have a loop antenna and won't work properly without the loop being connected. It won't need an external antenna, just the loop.

Next CORRECTED: This has been corrected because I stated the frequencies backwards. Test to see if your oscillator is working. Put another working AM radio tuned to a dead spot between 1400 and 1500 Kc next to your Sentinal. Turn on the Sentinal and tune it back and forth around 1000Kc. If your Sentinal oscillator is working at the proper frequency you should hear a squeal or a rushing noise from your other radio as you tune back and forth.

Come back after you try these things. You'll get it going eventually.

Reece
__________________
Reece

Perfection is hard to reach with a screwdriver.

Last edited by Reece; 06-08-2009 at 11:55 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:28 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.