Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 05-05-2009, 07:38 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
That won't work, as the tuner output in sets that old was the video intermediate frequency (IF). Basically, it's the TV channel converted from its original frequency to 41 to 45MHz in more modern sets, or 20 to 25Mhz in very old sets. But this signal hasn't been demodulated yet.

What may work is to grab the tuner output from another known working TV set. One that uses the same IF frequencies. Make up 3 cables with F connectors on one end, and RCA connectors on the other. and use a cable TV splitter, the source tuner feeds the splitter input, and one splitter output feeds the source tuner's own TV set IF input on its chassis as it did before, and the other splitter output feeds the TV under test's IF input. The source TV tuner still needs its B+ and AGC control lines, and the source TV chassis will provide its tuner with these. And the source TV will present video on its CRT, and sound, so you know you have a TV channel tuned in.

Conversely, as another test, to see if the color TV's tuner is working, make it the source and do the same splitter trick with its IF output with the splitter.
__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:38 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.