Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 05-02-2009, 06:17 PM
Kiwick's Avatar
Kiwick Kiwick is offline
slave to 3 equines
 
Join Date: Mar 2007
Location: Italy
Posts: 448
Nice set, i'm glad you saved it!

Looks like you're losing the vertical sync pulse somewhere, as it isn't even trying to lock the picture, maybe a bad transistor.

Was the cabinet particle board? if so, how did you manage to put the corners back together? i once restored a rare 1971 Grundig Triumph which spent some weeks in the elements and the particle board cabinet warped and splitted apart, restoring it was a work of love, i had to smash the cabinet apart, i then soaked each board in water then pressed them flat by laying them between the concrete floor of my garage and a heavy plywood sheet and then pressed them flat by leaving my car parked on top of the plywood sheet for a couple of days.

Then i glued the joints and put the cabinet back together using several roof rack straps under great force.

I also had to replace rusty trimpots and to wash the entire chassis with a PCB cleaner to remove the whitish corroded solder flux, then had to take the mechanical pushbutton tuner to its component parts to remove the rust and put it back together.

It looks very good now but not perfect, i had to put some filler in the corners as there was no way to put them back together perfectly.

I also found several other TVs after a severe flood struck near my town but these spent a few days under muddy water and were only good for parts.

Last edited by Kiwick; 05-02-2009 at 06:21 PM.
Reply With Quote
  #2  
Old 05-04-2009, 07:26 AM
larschr's Avatar
larschr larschr is offline
TeeVee collector
 
Join Date: Feb 2006
Location: Norway
Posts: 106
The cabinet hadn't started to peel apart yet, at least not more than maybe 1 millimeter at each corner. It was probably exposed to water for just a short time.
Reply With Quote
  #3  
Old 05-04-2009, 11:32 PM
site123a site123a is offline
VideoKarma Member
 
Join Date: May 2006
Posts: 240
Don't mean to sidetrack this thread, but did anyone here ever worked on a Tandberg monitor or know if there any good?
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:38 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.