Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 04-29-2009, 10:10 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I don't think I've seen a Funai TV over 5 or 6 years old that was still working. Most don't last that long. Cold solder joints, low grade caps, flyback failures, vertical deflection failures, etc. are the norm. My church had a 19" Funai built set that was used for maybe 1.5 hours every Sunday as a broadcast monitor. After about a year, they hit the power button and it fired up and shut down. They gave me the set and I found a shorted scan diode feeding the 200 volts to the video output circuit. The diode was a little glass 1N34 looking device. Not what you'd expect to see in a scan circuit. And, they generally don't take a power surge very well. Also, the power supplies are not protected; thus, often frying the rest of the set when they run wild and send several hundred volts through the rest of the chassis. I will say that I've never seen a bad CRT in one.

Their VCR's are even worse. I rarely see one over 2 years old that's still working. Many don't make it to one year.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:20 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.