Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 04-25-2009, 03:48 PM
Ed in Tx's Avatar
Ed in Tx Ed in Tx is offline
Zenith Walton My 1st TV
 
Join Date: Nov 2008
Location: DFW
Posts: 1,421
I've worked on several of those back in the day. One big problem they have that will cripple or kill the machine is the clock memory back-up capacitor on the timer board behind the front panel will leak and ruin the board. Something like .47F/5.5V "supercap" as I recall. Anyway I can pretty much guarantee the memory backup cap is no good, you can see that when you set the clock and unplug it, then plug back in. If the clock lost it's time, the cap is bad. Whether it is leaking you'd have to take it apart and look. That model as well as others with the same chassis and conventional tape loading have problems with the mode switch getting noisy causing transport operation problems ( a little shot of DeOxit in the switch helps) , also the tape guide rollers getting loose and out of alignment. And the board on the bottom of the deck has 3 screws that act as grounds for the circuit, and can get loose and cause weird symptoms. Fix is to add small star lockwashers under the screws to ensure ground. That little machine produced one of the best pictures of any VHS VCR. Good luck with it!
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:09 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.