![]() |
|
#15
|
||||
|
||||
|
Hello Jerome,
recently I have acquired another Kuba Porta-color on the British ebay. It was sold in non-working condition, "suitable for spares or repair", so I could win it for a low price. I wanted to take the 7.8 KHz coil from this set for my first set. But fortunately, there was only a small soldering problem at the anode connector of the PL504. After a few minutes this set works fine. The tint control of Simple PAL is a little bit tricky. When I change the input source (test pattern, DVD or aired broadcasts), I have to readjust the tint control. With fine tuning of the channel, the white tone also changes. You see, I have to go through the circuits. But now, I have the chance to measure the 7.8 KHz coil for getting the values to design a replacemend for the other set. P.S.: The emission of the 11SP22 in this British Porta-color is 0.4 mA on Blue, 0.4 mA on Green, and 0.4 mA on Red, similar to what I have measured on the other picture tube. Kind regards, Eckhard Last edited by yagosaga; 04-24-2009 at 03:51 PM. Reason: added CRT emission values |
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|