Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 01-31-2005, 08:09 PM
drh4683's Avatar
drh4683 drh4683 is offline
VideoKarma Member
 
Join Date: Jan 2003
Location: Chicago, IL
Posts: 2,094
Chad pretty much said it all there. Those ceramic wire wound resistors would commonly burn up/open resulting in a loss of B+. Those same resistors got hot enough to really burn up other close components expecially wires and the termial strips they were soldered on.

The stuck UHF tuner is common in almost every RCA set I came across. Problem is dried up grease in the UHF gear shaft. the steel shaft is inserted through about a 1" bushing on a pot metal bracket. the grease will dry up, turn into a gummy substance. Do not attempt to try to break it loose with pliers by turning the shaft or gear. What works best is to use a hair dryer or heat gun (yes, another heat gun trick for TV repair!) and heat the bushing. Be sure to pull the E clip off the end of the shaft so you can remove it. Once you get it hot enough, you can turn the shaft with a gentle twisting motion and pull it out of the bushing. then use a cotton swab of WD-40 or some other petroleum lubricant to break down the grease inside the bushing and on the shaft. Reassemble using any kind of oil, it will work as good as new.

Do you have a model number available? Keep an eye on ebay for remotes. Those rca 7 button ultrasonic remotes appear every so often.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here

Last edited by drh4683; 01-31-2005 at 08:11 PM.
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:24 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.