Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 04-11-2009, 05:44 PM
Mikey405 Mikey405 is offline
AK Member
 
Join Date: Mar 2007
Location: Solihull, England
Posts: 15
Well done Eckhard for rescuing that Kuba set. I kinda-like those sets. They always feel like they'll drop to bits at any minute when you pick them up and the picture always seems fuzzy on those low-definition tubes, but they do have a kind of charm about them.

Quote:
Originally Posted by Robert Grant View Post
It must be in there, but I don't see how the set "knows" which lines are R-Y, and which are Y-R.

Hi Robert. With 625 line PAL, each alternate line has a burst signal which "swings" +/- 45 degrees relative to the previous line. This "swinging burst" is then rectified to generate a 7.8KHz (half line frequency) square wave which then operates the PAL switch so that the R-Y synchronous demodulator recieves a reference signal in the "correct" phase relative to the signal.

Hope my dodgy explanation helps. Probably does more harm than good.

Kind regards.

From Mike.

Last edited by Mikey405; 04-11-2009 at 06:16 PM.
Reply With Quote
  #2  
Old 04-24-2009, 02:47 PM
yagosaga's Avatar
yagosaga yagosaga is offline
VK Member
 
Join Date: Jan 2005
Location: in Braunschweig
Posts: 690
Hello Jerome,

recently I have acquired another Kuba Porta-color on the British ebay. It was sold in non-working condition, "suitable for spares or repair", so I could win it for a low price. I wanted to take the 7.8 KHz coil from this set for my first set. But fortunately, there was only a small soldering problem at the anode connector of the PL504. After a few minutes this set works fine.

The tint control of Simple PAL is a little bit tricky. When I change the input source (test pattern, DVD or aired broadcasts), I have to readjust the tint control. With fine tuning of the channel, the white tone also changes. You see, I have to go through the circuits.

But now, I have the chance to measure the 7.8 KHz coil for getting the values to design a replacemend for the other set.

P.S.: The emission of the 11SP22 in this British Porta-color is 0.4 mA on Blue, 0.4 mA on Green, and 0.4 mA on Red, similar to what I have measured on the other picture tube.


Kind regards,
Eckhard
Attached Images
File Type: jpg testpattern.jpg (50.5 KB, 29 views)

Last edited by yagosaga; 04-24-2009 at 04:51 PM. Reason: added CRT emission values
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:57 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.