Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 04-11-2009, 12:08 AM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
And here it is installed inside a CM7000 CECB

I decided to change the channel this CM7000 transmits on to channel 2 (as the crystal I used, 18.432MHz puts it almost dead correct for channel 2) by installing the above modulator in it. The existing modulator in the CM7000 looks to be the crystal-less synthesizer type that has channel 3 or 4 "hard wired" into PLLs, which also produce the 4.5MHz sound carriers as well (which renders changing the master timing crystal of 4MHz not possible, as the sound carrier ends up being wrong). So I disabled it (shorted its output to ground) and cut the F connector center pin solder lug loose and connected it to the blue coax cable running from the new channel 2 modulator (I removed its old F connectors). And I also picked off the baseband mono audio and baseband video that feeds the old modulator to feed to the new one. That's the black shielded cables. The orange wire is switched 5V tapped off the main board.

This new channel 2 output is then fed into a splitter along with another box outputting on channel 4, and the merged signals then feed TV sets. And it looks like a master antenna in a town with a channel 2 and a channel 4. And as soon as I can find another modifyable TV modulator that I'll put on channel 6, then I'll have 3 channels. That's as many as I can do without lower sideband filtering.

Looks like this modulator was made by Panasonic, as I see that [M] logo on the top shield.
Attached Images
File Type: jpg P456.jpg (171.0 KB, 53 views)
__________________

Last edited by wa2ise; 04-11-2009 at 12:26 AM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:47 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.