![]() |
|
|
|
#1
|
||||
|
||||
|
If DC restoration is so simple, it should be on every TV. I'm pretty sure my 8" RCA metal portable doesn't have it. My 1978 GE solid state black & white set definitely has it.
__________________
Just look at those channels whiz on by. - Fred Sanford |
|
#2
|
|||
|
|||
|
This is one of those things that,at least in the vacuum tube days of TV, manufacturers thought they could bypass and save a few cents on. Once TVs became solid state, adding DC restoration became much cheaper.
Another area that was scrimped on in Vacuum tube TVs was the sound system. The use of ratio detectors/quadrature grid circuits without adding a true limiter stage is one of the reason tube type tvs have so much trouble with buzz in the sound. For example, I have two Hoffman Easy Vision TVs, one a 1953 Mark V chassis and one a 1954 chassis. The 1953 Mark V taps the sound off of the video detector and has two sound if stages, one being a true limiter. Sound is great. The 1954 model is cheapened with the sound being taken off of the video output and only one non-limiter IF stage used. So far, I have not been able to completely eliminate the buzz from the sound. A complete re-alignment might help(but also might not). The 1954 is also cheapened in the IF circuit(no issue using a DTV converter to drive it) and in the sync circuit(possible issue with strong signal). Both use ratio detectors for the sound. Moral of the story-manufacturers are always trying to reduce cost to make more money. Make the product just good enough to match competitors. |
|
#3
|
||||
|
||||
|
I agree with Andy that the Trinitron was a huge improvement back then due to the DC resto. Not many color sets had the ability to display a high contrast picture without losing the black level then. Seems like the resto circuit became commonplace in the early to mid 70s. IIRC, The early colortraks were among the first solid state RCAs to have a really good dc restorer .
|
|
#4
|
||||
|
||||
|
DC Restoration
It is interesting that some very early sets had DC restoration. I have a 1952 Truetone with DC Restoration and keyed AGC. It has one of the most bizarre tuners I have ever worked on though! has anyone come up with a DC Resto ad on to late 50's early 60's colors? My Magnavox t933 could use it as it is very dependent on program material.
|
|
#5
|
||||
|
||||
|
Would there be any benefit to adding DC restoration to an electrostatic Motorola?
__________________
Just look at those channels whiz on by. - Fred Sanford |
| Audiokarma |
|
#6
|
||||
|
||||
|
Motorola TS-4 DC restoration
DC on a TS-4 would be interesting. I restored one of those about 20 years ago and still use it occaisionally. They are fun sets, especially when the cable repairman comes to the house and all other sets are hidden except the TS-4. I like the picture on them!
|
|
#7
|
||||
|
||||
|
I have the 8" 9VT1 with the TS-18 chassis. I plan on getting it going again (needs ballast) and adding the retrace line suppression mod and though DC restoration might be worthwhile while I'm in there. I used mine regularly for five years after I restored it and always thought it had a good picture. Plus it's a black and white roundie.
__________________
Just look at those channels whiz on by. - Fred Sanford |
![]() |
| Thread Tools | |
| Display Modes | |
|
|