Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #2  
Old 03-18-2009, 01:51 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
I'm sure that radio uses a type 80 tube and two type 45's. The 80 will be a little pricey (depending on if you go for an original globe envelope type or one with the newer style envelope) but the 45's are about $80 a pop from AES. You can think the audiophool crowd for that! Be glad they're not made by Western Electric or they'd be $800 each! I usually won't replace a 45 unless it's dead. I've seen plenty that would check "bad" on a tube tester; but, would still perform in the radio. The other tubes should be reasonable.

I think 25 cycle power was used in Canada and I've seen some Sears Silvertone schematics for 25 cycle versions of their normal 60 cycle radios. You may have to replace the power transformer with a 60 cycle transformer; but, let's see what someone else says first. IIRC, that power transformer is encased in tar in that model. So, you'd have to melt out the tar and install a newer transformer in the old case if you expected the radio to look original.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:27 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.