Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 03-15-2009, 08:47 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
Some progress

I'm still making slow progress. Many of the paper caps are difficult to get to, buried under other parts. I found one good paper cap so far. It was the only one that didn't have blisters on the outside. I wonder if that's related.

I've also found quite a few open or out of tolerance resistors in the audio output section.

I started to do a quick check by checking the tube chart resistances given by the SAM's. I quickly learned that this was a waste of time. Many of the resistances given are wrong. The schematic from the same SAM's folder seems to agree with what I measure. It'll be easer just to check the individual resistors and not worry about whether the SAM's got it right.

John
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:55 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.