Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 03-06-2009, 11:50 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
The deflection yoke is probably out of position on the Sears. The yoke is the large copper wound device that's fitted on the CRT neck. To reposition the yoke, loosen the clampscrew that holds the yoke to the CRT neck and very carefully rotate the yoke left or right until the picture is straight. It should only take a very small amount of rotation. Do not move the yoke backward or forward, as this may mess up the purity and convergence. Also be aware that there is 25,000 volts on the CRT anode and there is some nasty voltage on the yoke terminals; so, use caution. Once the picture is straight, hold the yoke in place and tighten the clampscrew. Those old Sanyo built Sears sets generally hold up well and produce a good picture. I think you'll be pleased once everything is adjusted properly.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:28 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.