Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #10  
Old 02-28-2009, 10:08 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
I dismounted the bridge and started cleaning it and the chassis. So far no surprises other than a paper cap that has leaked a fair amount of oil

I managed to finaly remove the front plate from the CRT. The rubber pads were glued to it and the support plate. The pads peeled from the glue, but the glue is still on the CRT. I'm going to leave it because it won't be visible and it's too difficult to get off. It's a contact type cement.

There's a long concentric shaft on the tuner. The outper part changes bands and the center tunes. There was oil between them and it has gotten to be very viscous. I don't want to dissassemble it if I don't have to.

I might try the CRC electronic cleaner.

John
Reply With Quote
Audiokarma
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:49 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.