Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #4  
Old 02-19-2009, 01:43 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
OK, I made some adjustments and got a very nice picture out of this set. The CRT test around 55% on all 3 guns. The only thing that bothers me is some slight "noise" in the picture. This TV has both a VHF 75 ohm coax input and a VHF 300 ohm twin lead input. Most sets like this have some sort of switch to select between 75 and 300 ohm. This one does not. The garbage in the picture is mainly visible during a total black screen; but, can be seen on normal video if you look close enough. I tried moving the DTV converter box around as well as using a "real" coax interconnect cable (not the cheap cable supplied with the box). I guess for a Sharp set, it has a decent picture. I think Sharp was a little better during the '70's than they were in recent years.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:12 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.