Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #7  
Old 02-18-2009, 03:27 PM
dreyfoos dreyfoos is offline
VideoKarma Member
 
Join Date: Mar 2005
Location: Castro Valley, CA
Posts: 64
Here you go Eric. You're probably referring to a post I made re SlipPlate to the original AK thread entitled: "Outer coating on 10BP4 peeling." Earlier in that thread, I posted resistance measurements. BTW, your masking job looks factory to me. I do my circles with some contact paper that the 99cent store sells.


Later in the thread, I posted these capacitance figures:

My Sylvania Characteristics of Cathode Ray Tubes from 1959 shows a coating capacitance of 500 uuf min. to 2500 uuf max. for a 10BP4. It wants 750 – 3000 for a 12LP4.

I got out the old Heathkit IT-11 cap checker. I measured from the 2nd anode button to the outer coating of my freshly Slip-Plate coated neckless (thanks to UPS) 10BP4

The reading was 900 uuf.

The reading on my new RCA 12KP4 is 1100. The Sylvania reference is 500 – 2500 for the 12KP4.

How thick is the Slip-Plate coating that I sprayed on? It was enough so that I could no longer see the glass underneath.

Roger
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:02 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.