Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Rectangular Screen Tube Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-01-2009, 12:40 PM
maxm's Avatar
maxm maxm is offline
Surrounded by old stuff
 
Join Date: Feb 2004
Location: Chicago
Posts: 371
Is this a slot loading or tray loading iMac? I've never worked on a tray loader but I've disassembled several of the later slot loading iMacs, mostly to clean out the dust. Taking off the bottom to get to the motherboard is pretty easy, but taking off the top to get to the power supply and CRT is harder, there are those awful plastic tabs all over that you will end up breaking off most of them. I think the tray loading ones are more difficult to take apart. The plastic in these is notorious for degrading due to the heat, particularly the ribbed plastic that surrounds the screen, it has been cracked on severs of the ones I've worked on. The tray loading iMacs have fans, but the slot loading ones work with convection only, though I think there were some fans made that fit around the handle.
Reply With Quote
  #2  
Old 02-01-2009, 01:46 PM
karmaman's Avatar
karmaman karmaman is offline
AK Member
 
Join Date: Mar 2007
Location: Escondido, CA
Posts: 137
I replaced the flyback on a Rev. A tray-loader. Managed to do it without cracking the plastic but I came mighty close. I'd suspect caps because these things run HOT!

Also, I think the tray loaders are easier to take apart than the slot loaders. Getting to the PAV in my Rev. E slot-loader is a pain.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:47 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.